4-in-1 versatile cleaning
Sweep, scrub, vacuum and dust-mop
Real-time roller mop self-cleaning
Cleans as it scrubs, stays consistently clean
Streak-free in one pass
Fast-drying floors, no water marks
8-in-1 self-cleaning station
No more daily maintenance
AI Magic Cleaning
Precise execution, continuous improvement
Compact design, agile navigation
Moves freely through narrow spaces
21.5-inch advertising display
Dynamic marketing, precise reach
Auto mapping, one-click start
Intuitive operation, easy to use
Four cleaning modes. One compact robot.
4-in-1 versatile cleaning
PUDU ET1 combines sweeping, scrubbing, vacuuming and dust-mopping in a front-sweep, rear-scrub workflow that handles dry debris and wet stains in one pass.
Commercial-grade cleaning performance
Unleash ultimate scrubbing power
A roller speed of up to 800 rpm generates high-frequency scrubbing, while 5,000 Pa of downward pressure maintains steady floor contact to remove grease, footprints and other stubborn stains.
800 rpm
Maximum roller speed
5,000 Pa
Downward pressure
Deeper cleaning for sticky stains
85°C hot scrubbing
The docking station supplies PUDU ET1 with 85°C hot water, while onboard heating maintains the temperature during cleaning to dissolve grease and sticky residues.
Consistent cleaning performance
Self-cleans as it scrubs and leaves floors streak-free
Real-time roller mop self-cleaning keeps the roller consistently clean. Immediate dirty-water recovery leaves floors fast-drying with minimal residual moisture after a single pass.
Streak-free in one pass
PUDU ET1 recovers dirty water immediately, reducing water buildup and slip risk while protecting moisture-sensitive surfaces such as hardwood and marble.
End-to-end automation
Fully automated 8-in-1 maintenance
After each task, PUDU ET1 returns to its compatible station for automated charging, fluid handling and self-cleaning, reducing routine operator maintenance.
Auto charging
Automatic roller cleaning
Auto squeegee rinsing
Automatic roller spin-drying
Auto clean-water refill
Auto waste-water drainage
Auto agent dosing
Auto water heating
Auto dust collection, empty once a week
A 2.5 L onboard dust box automatically collects dust, hair and debris after every run, reducing disposal frequency to approximately once a week.
AI-native cleaning
AI Magic Cleaning
PUDU ET1 integrates perception, motion control and cleaning systems into a unified decision loop. From mapping and stain recognition to heatmaps and adaptive cleaning, it continuously optimizes each cleaning task.
Auto mapping, one-click start
PUDU ET1 autonomously maps new environments without pre-mapping or complex setup. Power it on to start cleaning and move quickly from deployment to a live demonstration.
AI floor-surface and stain recognition
PUDU ET1 adjusts its cleaning mode based on floor surfaces, stain types and environmental changes to maintain cleaning performance while extending battery runtime.
Floor-surface recognition
Detects carpet edges and lifts the scrubbing roller to help keep carpet dry.
Liquid-spill recognition
Lifts the sweeping and side brushes over liquid spills to help prevent secondary contamination.
AI adaptive scrubbing
ET1 recognizes stubborn stains and triggers a three-part response for deeper cleaning.
Roller speed increased
Travel speed reduced
Water output increased
More value per route
Optional 21.5-inch advertising display
The optional ultra-large HD display supports brand promotion, event marketing and dynamic information. Multiple hardware extensions and flexible power options support different commercial scenarios.
Custom body wraps
Large, flat body surfaces can carry custom branding and campaign graphics for greater in-store visibility.
AI-generated body-wrap examples are shown for reference only.
Built for constrained commercial spaces
Compact design, agile navigation
With minimum clearance of 50 cm in width and 60 cm in height, PUDU ET1 can move through narrow aisles, shelving gaps and active customer environments with minimal disruption.
Simple day-to-day ownership
Intuitive operation system
Dedicated manager and operator experiences, built-in training and proactive maintenance guidance simplify deployment and everyday use.
Dual-system design
Provides professional configuration for managers and simplified daily cleaning controls for operators.
Built-in training system
Provides guided onboarding and cleaning-mode instruction to help users get started faster.
Proactive maintenance alerts
Reminds users when upkeep is due and guides routine maintenance and consumable replacement.
Detachable and washable cleaning components
The side brush, squeegee, scrubbing roller, roller chamber, sweeping brush, trash bin, dust box, water tanks and battery are detachable for easier cleaning and service. Thirty-second quick-release cleaning modules simplify deeper maintenance.
Product overview
PUDU ET1 specifications
- Dimensions (L × W × H)
- 500 × 380 × 580 mm (19.69 × 14.96 × 22.83 in)
- Weight
- Approx. 45 kg (99.2 lb)
- Cruise speed
- Max. 1.0 m/s (3.28 ft/s)
- Cleaning efficiency
- 300–720 m²/h (3,229–7,750 ft²/h)
- Cleaning width
- Scrub / dust-mop: 30 cm (11.81 in); sweep / vacuum: 39 cm (15.35 in)
- Clean / waste water capacity
- Clean water: 8 L (2.11 gal); waste water: 7.2 L (1.9 gal)
- Dust box capacity
- 2.5 L (0.66 gal)
- Minimum clearance
- 50 cm width × 60 cm height (19.69 in × 23.62 in)
- Run-time
- 2.5–4 hours
- Battery capacity
- 35 Ah
- Charging time
- Approx. 3 hours
Talk with our Canadian team
Is PUDU ET1 right for your workflow?
Share your site, workload, and goals. We’ll call with practical next steps.