Configurable mowing patterns
Autonomous travel between zones
1,600 mm triplex cutting width
Four-wheel drive on slopes up to 30°
Up to 12 hours of operation
Electric drive with low-noise operation
Three contour-following cutting units
A precise route across every field
GT7 combines RTK, LiDAR and vision for stable navigation, with published RTK positioning accuracy of ±2.5 cm.
A consistent cut, a deliberate pattern
Configure cutting angles, direction changes and lane offsets. Automated path planning supports consistent striping across professional sports turf.
Move autonomously between turf zones
Mapped internal routes connect pitches and turf zones. GT7 travels to the next area and resumes mowing on arrival, allowing one robot to serve multiple fields.
Wide cutting coverage, agile movement
The triplex cutting assembly spans 1,600 mm. GT7 also navigates narrow, winding paths to work across complex sports-field layouts.
Four-wheel drive for rolling terrain
Four-wheel drive supports traction across uneven ground and mowing slopes up to 30°.
Electric operation with less noise
The electric drive reduces operating noise. In non-collection mode, the suction motor can be switched off for quieter work during early mornings, evenings or facility opening hours.
Built for long working days
A 26 kWh battery supports up to 12 hours of operation and up to 7 hectares per charge in non-collection mode.
12 h
Maximum run-time
7 ha
Maximum area per charge
Manufacturer ratings in non-collection mode; actual results depend on terrain, grass and operating conditions.
Choose mowing with or without collection
Switch between regular mowing and active grass collection to suit the turf. Collection mode includes bin-full detection and automatic task resumption.
Twin-fan vacuum collection
Two fans draw grass clippings, fallen leaves and light debris into the collection hopper during mowing.
Three cutting units that follow the ground
Each reel unit floats independently to track ground contours. The articulated suspension helps maintain a consistent height of cut on undulating sports turf.
360° sensing around the robot
Surround-view RGB cameras, RGBD depth sensing, ultrasonic sensors and LiDAR combine to monitor the environment around GT7.
Adapt to obstacles along the route
Multi-sensor data and AI vision help recognize turf boundaries, pedestrians and vehicles. GT7 can stop, wait or navigate around an obstacle.
Keep track from a distance
Monitor location, job progress and robot status, with fault notifications to support daily grounds operations.
Dial in your height of cut
Tool-free adjustment supports cutting heights from 5 to 50 mm, with 8 or 11 blades per reel.
Product overview
PUDU GT7 specifications
- Dimensions (L × W × H)
- 1,950 × 1,600 × 1,400 mm (76.8 × 63.0 × 55.1 in); lifted: 1,950 × 1,500 × 1,400 mm (76.8 × 59.1 × 55.1 in)
- Weight with batteries
- 900 kg (1,984 lb)
- Mowing rate
- Up to 8,000 m²/h (2 acres/h)
- Cutting width
- 1,600 mm (approximately 63 in)
- Blades per reel
- 8 or 11
- Height of cut
- 5–50 mm (0.197–1.97 in)
- Maximum mowing speed
- 11 km/h
- Battery capacity
- 26 kWh
- Run-time
- 10–12 hours
- Area per full charge
- Up to 70,000 m² / 7 ha / 17 acres (non-collection mode)
- Charging time
- Standard: 8 hours (3 kW); optional fast charging: 4 hours (6 kW)
- Maximum mowing slope
- 30°
Specifications are published by PUDU. Confirm the configuration and site requirements with Nova before purchase.
Talk with our Canadian team
Is PUDU GT7 right for your workflow?
Share your site, workload, and goals. We’ll call with practical next steps.