Plug and play
Rapid mapping and workflow setup
AI-native autonomy
Perceives, adapts and acts onboard
Distributed fleet scheduling
Coordinated multi-robot operation
20-second fork-in
Faster high-frequency pallet pickup
Multi-layer safety perception
3D LiDAR, depth cameras and sensor fusion
IoT integration
PUDU Link, APIs, voice, task buttons and compatible IoT equipment
Standardized pallet automation
Plug and play, deploy in minutes
Multi-sensor navigation, edge intelligence and onboard AI allow MP2000 to map its environment and configure workflows without dedicated reflectors, QR codes, extensive site modification or a complex platform rollout.
Built for real warehouse conditions
AI-native intelligence for autonomous handling
MP2000 brings storage occupancy recognition, load-carrier learning and clearance assessment into one onboard decision loop so the robot can adapt to changing warehouse conditions.
Standard pallet compatibility
Works with common three-runner and perimeter-base pallet formats.
Non-standard load-carrier compatibility
Learns custom carrier dimensions and characteristics for precise fork engagement and stable transport.
AI storage detection for seamless pallet handling
MP2000 recognizes occupied and open storage positions, identifies pallet placement and selects the appropriate pickup or drop-off target.
Misalignment adaptation for precise fork entry
The robot adapts to pallet placement variance up to 15 cm in position and 15° in angle, reducing manual repositioning.
Intelligent clearance assessment
MP2000 measures load dimensions, contours and available passage space, including thresholds up to 10 mm and gaps up to 35 mm, before planning a safe route.
Multi-robot coordination
Distributed intelligence, coordinated fleets
Each robot can make decisions and plan routes independently, while inter-robot communication coordinates tasks across the fleet. Fleet collaboration can continue in offline environments, supporting orderly operation when external connectivity is unavailable.
High-frequency material movement
Fast fork-in, efficient pallet transport
An optimized fork-handling process completes fork entry in as little as 20 seconds, while loaded and unloaded travel speeds help reduce cycle time across repetitive warehouse and factory workflows.
Designed for tight industrial layouts
MP2000 can complete a 90-degree pallet pickup in aisles as narrow as 2 m and work with load-carrier spacing down to 15 cm, helping facilities use existing storage space efficiently.
20 s
Fork-in time
1.6 m/s
Maximum unloaded speed
1.2 m/s
Maximum loaded speed
2 m
Minimum 90° pickup aisle
Multi-layer perception
3D sensing for safer autonomous transport
Depth cameras, 3D LiDAR and a multi-sensor safety stack monitor people, equipment and obstacles across multiple heights in mixed human-robot environments.
360° perception
Monitors the operating area around the robot for safer navigation.
Dynamic obstacle avoidance and stop
Detects moving obstacles and intelligently avoids or stops in real time.
Static obstacle rerouting
Plans around fixed obstacles when a safe route is available.
Operator control when it matters
Switch between autonomous and manual modes
MP2000 handles routine tasks autonomously while allowing operator assistance when needed, balancing automation efficiency with direct control.
Flexible workflow integration
Connected to the tools and infrastructure you use
Tasks can be dispatched through PUDU Link, APIs, voice commands or task buttons. Compatible deployments can also integrate with elevator controls, automatic doors and other IoT equipment.
PUDU Link
Automatic-door integration
Elevator-control integration
Task-button control
Core applications
Pallet movement across factory, warehouse and logistics workflows
MP2000 is designed for repetitive pallet transport between line-side storage, production areas, warehouses and logistics-transfer points.
Factory line-side delivery
Move palletized material between storage and production work areas.
Warehouse pallet handling
Automate high-frequency pickup, transport and put-away workflows.
Logistics-centre transfer
Support repeatable pallet movement across logistics facilities.
Product overview
PUDU MP2000 specifications
- Models
- MP2000 Standard (MPID01-M); MP2000 Narrow Fork (MPID01-N)
- Dimensions (L × W × H)
- 1585 × 910 × 1870 mm (62.40 × 35.83 × 73.62 in)
- Maximum payload
- 2,000 kg (4,409 lb)
- Maximum lift height
- 200 ± 5 mm (7.87 ± 0.20 in)
- Lowered fork height
- 80 ± 5 mm (3.15 ± 0.20 in)
- Fork outer width
- Standard: 620 mm (24.41 in); Narrow Fork: 550 mm (21.65 in)
- Right-angle stacking aisle width
- ≤2,000 mm with a 1200 × 1000 mm pallet (1200 mm along forks); ≤1,960 mm with a 1200 × 800 mm pallet (1200 mm along forks)
- Navigation
- 3D LiDAR-SLAM and VSLAM
- Maximum speed
- 1.6 m/s unloaded; 1.2 m/s loaded
- Obstacle / gap crossing
- 10 mm obstacle height; 35 mm gap width
- Climbing capability
- 3° at maximum load; 8° unloaded
- Charging time
- Approx. 2 h at 200–240 VAC; approx. 3.2 h at 100–120 VAC
- Run-time
- 12 h unloaded; 6 h at maximum load
Talk with our Canadian team
Is PUDU MP2000 right for your workflow?
Share your site, workload, and goals. We’ll call with practical next steps.